LCR Meter

Multichannel LCR meter MICROTEST 9332 (PCB/FPC application) enables electrical characteristic testing of multiple coil circuits on multi-layered boards.

• 1% basic accuracy
• 64 test channels
• Test 32 sets of inductive impedance (Ls/Rs/DCR/Q).

Benchtop LCR meter MICROTEST 6365A provides a frequency range of 0.1Hz to 200kHz and is suitable for applications such as electrochemical impedance or battery material testing. With an extremely low starting frequency of 0.1Hz, it can accurately measure parameters such as |Z| (impedance), |Y| (admittance), θ (phase angle), X (reactance), R (series/parallel resistance), G (conductance), B (susceptance), L (inductance), D (dissipation factor), Q (quality factor), DCR (DC resistance), and C (capacitance).

• Ultra Low Frequency 0.1Hz-200kHz
• Output Impedance 100Ω
• Open Circuit/Short Circuit
• Meter Mode
• List Mode
• 7.0" TFT, 800×480 color screen
• Four Parameters Displayed Simultaneously
• Comparator/BIN
• Basic Accuracy ±0.05%
• Using Graphical Analysis by PC Link
• RS-232, Handler LAN, USB Host, Handler GPIB.

LCR meter MICROTEST 6360 Series provides precise and fundamental measurement functions with test frequencies of 20k/100k/200k/500k/1MHz. MICROTEST 6360 can measure parameters such as |Z| (impedance), |Y| (admittance), θ (phase angle), X (reactance), R (series/parallel resistance), G (conductance), B (susceptance), L (inductance), D (dissipation factor), Q (quality factor), DCR (DC resistance), and C (capacitance).

• Test Frequency 10Hz-1MHz
• Output Impedance 100Ω
• Open Circuit/Short Circuit
• Meter Mode
• List Mode
• 0" TFT, 800×480 color screen
• Four Parameters Displayed Simultaneously
• Comparator/BIN
• Basic Accuracy ±0.05%
• Using Graphical Analysis by PC Link
• RS-232, Handler LAN, USB Host, Handler GPIB.

Precision LCR meter MICROTEST 6630 Series (10Hz ~ 50MHz) provides a wide frequency range of 10Hz to 50MHz for measuring the impedance characteristics of components and materials. The measured parameters include |Z| (impedance), |Y| (admittance), θ (phase angle), X (reactance), R (series/parallel resistance), G (conductance), B (susceptance), L (inductance), D (dissipation factor), Q (quality factor), DCR (DC resistance), C (capacitance), ESR (equivalent series resistance), ε (relative permittivity), and μr (relative permeability).

• Frequency range: DC, 10Hz to 1/3/5/10/20/30MHz/50MHz
• Basic accuracy up to: ±0.05%
• Automatic Level Control (ALC)
• Output impedance 25Ω/100Ω, switchable
• Support meter mode and list mode
• Ultra-high measuring speed < 3ms
• Open circuit/short circuit/load correction function
• Comparator function
• BIN classification function
• Built-in the Permeability-μr
• Built-in the Dielectric constant-εr.