Measuring Equipment

The PCE-PGM 100-ICA Paint Gloss Tester is a gloss tester that works with 20°, 60° and 85° geometry measurements, using the reflectance principle. This means that the gloss meter emits light that hits the surface to be tested, part of the light will be absorbed by the surface and another part will be reflected from the instrument to analyze and give results. Absolutely reliable.

• Measurement Geometry: 20° / 60° / 85°
  
• Standard: ISO 2813 / GB / T 9754 / ASTM D 523/ ASTM D 2457
  
• Range: 20°: 0 ... 1000 GU / 60°: 0 ... 1000 GU / 85°: 0 ... 160 GU
  
• Includes ISO Calibration Certificate.

The PCE-GM 100-ICA gloss meter is used to measure gloss on flat surfaces and works on the principle of a reflectometer. The compact design and ergonomic dimensions of the PCE-GM 100-ICA gloss meter make it useful for on-site measurements or during production plant operations. All test instruments are supplied with calibration and can be ISO certified as an option.

• Measuring angles 20º, 60º and 85º
  
• Measuring range: 0.0 to 200 gloss units
  
• Standard: ISO 2813, GB 9754-88, GB 9966.5
  
• Includes ISO Calibration Certificate.

Paper and Textiles Gloss Gauge - The PCE-GM 55 Gloss Gauge is a 3-angle luminance instrument. The measuring angles of the gloss meter are 20°, 45° and 75°. This allows the gloss meter to be used for gloss measurement in the high gloss and medium gloss ranges. Special measuring angle of 75° enables gloss level measurement on paper and textiles.

• Range: 0 ... 200 0 ... 200 gloss units / highlights
  
• Accuracy: ± 1 gloss units
  
• Repeatability: ± 0.5 gloss units
  
• Optical Angle: 20°, 45°, 75°
  
• Measurement for medium and high gloss
  
• Gloss measurement on fabric and paper can
  
• Includes ISO Calibration Certificate.

Gloss meter PCE-GM 80-ICA - Gloss meter equipped with an external gloss sensor. The gloss meter's very small sensor measuring surface Ø 4.5 mm contributes significantly to the ability to perform measurements on small hard-to-reach surfaces, giving this instrument versatility.

• Measuring geometry: 60°
  
• Measuring range up to 1000 GU
  
• Measuring surface: 4.5 mm
  
• Data storage: 1245 measured values
  
• Interface: Micro USB
  
• Includes ISO Calibration Certificate.

The PCE-RM 100 gloss and opacity meter is used to measure the reflectivity properties of surfaces in relation to opacity. The PCE-RM 100 gloss meter is used in stained glass, film quality, paper opacity, shine and hidden strength of various paints, inks and coatings - this gauge delivers efficiency and extremely reliable accuracy.

• Measuring range: 0 ... 100 (0 is transparent and 100 is fully opaque)
  
• Optical measuring angle: 45 degree angle
  
• Measurement accuracy: ±1
  
• Resolution: 0.1
  
• Battery Operation
  
• Interface and software.

Gloss meter PCE-GM 60Plus-ICA - Gloss meter with touch screen is a portable 60 degree gloss meter. This paint and coating coverage meter measures gloss units (GU) on the surface of a material. Rechargeable gloss meter or gloss meter using reflected light for gloss measurement in accordance with ISO 2813, GB/T 9754, ASTM D523 and ASTM D2457 standards.

• Measuring geometry: 60° . angle
  
• Measuring range: 0 ... 200 GU
  
• Measurement accuracy ±1.5 G
  
• 3.5" LCD touch screen
  
• Light source: D65
  
• Wave length: 400-700nm
  
• Includes ISO calibration certificate.