Product
Categories
- Measuring Equipment
- Force measuring equipment
- LCR Meter
- Versatile measuring equipment
- Temperature measuring equipment
- Power gauges
- Noise meter
- Roughness measuring equiment
- Refractometer
- Viscosity meter and rheometer
- Magnetic field measuring equipment
- Microscope
- Roundness measuring equipment
- Contour measuring equipment
- Gas measuring equipment
- Diagonal and straight line laser
- Humidity measuring equipment
- Climate measuring equipment
- Spectrophotometer
- Light meter
- Gloss measuring equipment
- Distance measuring equipment
- Airflow measuring equipment
- COD meter
- Altimeter
- Mass measuring equipment
- DO meter
- Pressure gauge
- Hardness measuring equipment
- Flow meter
- Radiation meter
- Turbidity meter
- Length measuring equipment
- Thickness measuring equipment
- Dimension measuring equipment
- Sound level meter
- Analytical Equipment
- Testing Equipment
- Rub tester
- DC Bias current test system
- Hipot tester
- Impulse winding tester
- Transformer test
- Air permeability tester equipment
- Weight checking equipment
- Protective equipment testing equipment
- Insulation testing equipment
- Material flow index tester
- Friction testing equipment
- Headphone testing equipment
- Shrinkage testing equipment
- Cable harness tester
- Heat seal testing equipment
- Engine test system
- Edge banding tester
- Stacking and compression testing equipment
- EV charging connection test system
- Versatile test equipment
- Vibration shaker test system
- Organic gas transmission rate test system
- Adhesion testing equipment
- Food testing equipment
- Seal leak tester
- Material mechanical property testing machine
- Tensile strength test equipment
- Water vapor permeability tester
- Apparatus for testing water vapor permeability by means of an electrolytic detection sensor
- Equipment for testing water vapor permeability by means of a moisture detection sensor
- Equipment for testing water vapor permeability by infrared detection sensor method
- Equipment for testing water vapor permeability by gravity method
- Air permeability tester
- Concrete testing equipment
- Maintenance Equipment
- Pulley alignment
- Parallel roll and roller alignment
- Video borescope
- Wood trunk defect testing equipment
- UV radiation equipment
- Ultrasonic weld testing equipment
- Defect detector
- ESD electrostatic simulator
- Surge generators and EMC measuring systems
- Bearing heater
- Concentric coaxial alignment equipment
- Dew point scanning equipment
- Sound meter calibration system
- Device for leak diagnosis and tightness test
- Metal detector
- Thermal camera
- High speed camera
- Routing system
- Rebar detector
- Vibration diagnostic equipment detects defects
- Voltage detector
- Crankshaft deflection indicator
- Gas detector
- Pipeline detector
- Vulnerability detector
- Air quality monitoring equipment
- Surface wall scanner
- Mechanical calibration equipment
- Process Equipment
- DC bias current source
- Workstation ART
- PCR thermal cycler
- Time-Lapse IVF incubator
- Biological safety cabinets
- Ultra-low temperature freezer
- Nucleic acid extraction system
- PCR cabinet
- Cell harvesting system
- Furnaces
- Bioreactors and fermenters
- Sound source
- Fog and smoke simulation system
- Special function
- Titrator
- Environmental testing room
- Humidifiers
- Stirrer
- Shaker
- Centrifuge
- Industrial Equipment
- CAN solutions
- Contactless card readers
- Humidity sensor
- Motor
- Gear reducer
- Dehumidifying device
- Air purification equipment
- Drying equipment
- Heating equipment
- Ventilation equipment
- PCAN-USB adapter
- Polynomial vehicle interface
- Guide system
- Fingerprint card
- Products
Measuring Equipment
Showing 31–36 of 138 results
Gloss and opacity meter PCE-RM 100
Model: PCE-RM 100
The PCE-RM 100 gloss and opacity meter is used to measure the reflectivity properties of surfaces in relation to opacity. The PCE-RM 100 gloss meter is used in stained glass, film quality, paper opacity, shine and hidden strength of various paints, inks and coatings - this gauge delivers efficiency and extremely reliable accuracy.
- Measuring range: 0 ... 100 (0 is transparent and 100 is fully opaque)
- Optical measuring angle: 45 degree angle
- Measurement accuracy: ±1
- Resolution: 0.1
- Battery Operation
- Interface and software.
SIGN UP FOR A CONSULTATION
Please fill in the form below and send your comments and questions to GMGA, we will respond to your email as soon as possible.
Gloss measuring device PCE-GM 60Plus-ICA includes ISO certification
Model: PCE-GM 60Plus
Gloss meter PCE-GM 60Plus-ICA - Gloss meter with touch screen is a portable 60 degree gloss meter. This paint and coating coverage meter measures gloss units (GU) on the surface of a material. Rechargeable gloss meter or gloss meter using reflected light for gloss measurement in accordance with ISO 2813, GB/T 9754, ASTM D523 and ASTM D2457 standards.
- Measuring geometry: 60° . angle
- Measuring range: 0 ... 200 GU
- Measurement accuracy ±1.5 G
- 3.5" LCD touch screen
- Light source: D65
- Wave length: 400-700nm
- Includes ISO calibration certificate.
SIGN UP FOR A CONSULTATION
Please fill in the form below and send your comments and questions to GMGA, we will respond to your email as soon as possible.
UCI hardness tester PCE-5000
Model: PCE-5000
UCI Hardness Tester PCE-5000 is a hardness tester that uses the ultrasonic contact impedance (UCI) method of ASTM A1038 to measure the hardness of metals and alloys with a minimum thickness of 2 mm / .08 in, in Non-destructive testing produces micro indentations.
- Measured according to the method of ultrasonic contact impedance (UCI) of ASTM A1038
- Measurement units: Rockwell A (HRA), Rockwell B (HRB), Rockwell C (HRC), Brinell (HB), Vickers (HV) and MPa (N/mm²) SI units
- Measuring range: 61-85.6 HRA, 41-100 HRB, 20.3-68 HRC, 85-650 HB, 50-999 HV, 255-2180 MPa (N/mm²)
- Accuracy: ±1.5 HR, ±3% HB, ±3% HV,
- Repeatability: ± 0.3%
- Memory size: 1,000 groups for measurement data and 20 groups for calibration data
- Different types of probes (automatic motorized transducers) are available.
SIGN UP FOR A CONSULTATION
Please fill in the form below and send your comments and questions to GMGA, we will respond to your email as soon as possible.
UCI hardness tester PCE-3500 with ISO certificate
Model: PCE-3500
UCI hardness tester PCE-3500 - Ultrasonic contact strength tester is designed for non-destructive hardness measurement of metal components. A 136° Vickers diamond at the probe is excited with its self-resonance to allow the user to very precisely measure the hardness of small objects, thin-walled objects (>1 mm) and hard layers surface.
- Probes with 50 Newtons / 11.2 lbf force, 10 and 98 N optional
- Test HRC, HRB, HV, HB, MPa
- Memory function via SD card and PC software included
- Large color LCD display with backlight.
SIGN UP FOR A CONSULTATION
Please fill in the form below and send your comments and questions to GMGA, we will respond to your email as soon as possible.
Universal hardness tester PCE-3000UL
Model: PCE-3000UL
The PCE-3000UL Universal Hardness Tester can be used to quickly test the hardness of parts even after installation with two professional probes. This instrument offers a wide measuring range, easy handling, robust design, and temperature resistance up to 40°C (104°F). Measuring hardness in Rockwell, Brinell and Vickers, the UCI durometer can test the tensile strength of steel up to 1740 MPa or 70 HRC. The tester comes with two probes, one UCI probe for non-destructive testing and one Leeb probe for rebound testing.
- Non-destructive hardness testing
- Ultrasonic hardness test method + Leeb
- Various hardness scales can be selected
- 5 materials can be tested
- 2 probes for UCI and Leeb . recovery testing.
SIGN UP FOR A CONSULTATION
Please fill in the form below and send your comments and questions to GMGA, we will respond to your email as soon as possible.
Concrete hardness test hammer PCE-HT 225E
Model: PCE-HT 225E
PCE-HT 225E Concrete Hardness Hammer, also known as concrete recovery hammer or Swiss hammer, is used for non-destructive measurement of surface hardness and compressive strength. Suitable for use with concrete, stone and building materials. This concrete hardness tester has a live digital display, voice function, USB data interface and memory to store up to 200 measurement values.
- Test range: 10 ... 60 MPa or 100 ... 600 kg/cm² / 1450.38 ... 8702.26 psi
- Impact Energy: 2,207 J or N-m / 0.225 kgf.m / 1.6278 ft-lb or Type N
- Stroke : 75 ± 0.3 mm / 2.95 ± 0.012 in
- Radius of sphere tip: 25 ± 1 mm / 0.99 ± 0.04 in
- Includes data processing software.
SIGN UP FOR A CONSULTATION
Please fill in the form below and send your comments and questions to GMGA, we will respond to your email as soon as possible.
