Products

The reinforced concrete detector NOVOTEST CCM-RD 170 (rebar locator) is used to measure the thickness of the concrete shell, locate and estimate the diameter of reinforcement of reinforced concrete products. steel in conditions of factories, construction sites, buildings and constructions in use according to BS 1881, DIN 1045, SN 505262 and SS 78-B4 standards.

The concrete elastic hammer (sclerometer) NOVOTEST SH - is an instrument for testing the strength of concrete and other building materials. The most popular tool in the world for measuring the strength of concrete is the Schmidt Hammer. The device is named after the engineer Ernst Schmidt, who invented the construction of the durometer.

The NOVOTEST IPSM Concrete Strength Meter is a device that searches for non-destructive defects in concrete products, bricks and other solid materials based on the analysis of the propagation of ultrasonic waves in the material.

Two transducers are directly connected to the device (transmitter and receiver) during operation, the device has an ultrasonic wave time between the transducers, there is a fixed base (the distance between the transducers ), this ultrasonic flaw detector calculates the velocity of ultrasonic waves in the material, based on which it is possible to build a correlation with the test parameter. This method allows the user to evaluate parameters such as strength, density, elastic modulus, acoustic index and other parameters that are correlated with the propagation speed of ultrasound in the material.

Structural Steel Analyzer or Force Gauge NOVOTEST KRC-M2 is used for non-destructive testing of heat and thermomechanical treatments, evaluation of mechanical properties and residual stresses, based on principle Force measurement of metal products according to IEC 60404-7 standard.

The PCE-TDS 100H Ultrasonic Liquid Flow Meter is for non-invasive, unobstructed or influenced and highly accurate measurement of the flow rate of liquids in metal, plastic and high-grade pipes and tubes. su has a diameter of 57 … 720 mm / 2 ... 28 in

• Measuring range: -32 ... 32 m/s, -105 ... 105 ft/s
  
• Resolution: 0.0001 m/s, 0.00033 ft/s
  
• Pipe size: DN 50 … 700, 57 … 720 mm (approx. 2 … 28”)
  
• Sensor temperature range: 0 ... 160°C / 32 ... 320°F
  
• Sensor settings: V, Z
  
• Includes TDS-M1 sensors
  
• Includes ISO Calibration Certificate.

The PCE-TDS 100HS Ultrasonic Flow Meter is a non-invasive, unobstructed and highly accurate liquid flow meter for the flow rate of liquids in metal pipes and tubes, plastic and rubber with a diameter of 20 … 108 mm / 3/4 in ... 4in.

• Measuring range: -32 ... 32 m/s, -105 ... 105 ft/s
  
• Resolution: 0.0001 m/s, 0.00033 ft/s
  
• Pipe size: DN 15 … 100, 20 … 108 mm (approx. 3/4 … 4")
  
• Sensor temperature range: 0 ... 160°C / 32 ... 320°F
  
• Sensor settings: V, (N,W)
  
• Includes ISO Calibration Certificate.