Products

The PCE-RM 100 gloss and opacity meter is used to measure the reflectivity properties of surfaces in relation to opacity. The PCE-RM 100 gloss meter is used in stained glass, film quality, paper opacity, shine and hidden strength of various paints, inks and coatings - this gauge delivers efficiency and extremely reliable accuracy.

• Measuring range: 0 ... 100 (0 is transparent and 100 is fully opaque)
  
• Optical measuring angle: 45 degree angle
  
• Measurement accuracy: ±1
  
• Resolution: 0.1
  
• Battery Operation
  
• Interface and software.

Gloss meter PCE-GM 60Plus-ICA - Gloss meter with touch screen is a portable 60 degree gloss meter. This paint and coating coverage meter measures gloss units (GU) on the surface of a material. Rechargeable gloss meter or gloss meter using reflected light for gloss measurement in accordance with ISO 2813, GB/T 9754, ASTM D523 and ASTM D2457 standards.

• Measuring geometry: 60° . angle
  
• Measuring range: 0 ... 200 GU
  
• Measurement accuracy ±1.5 G
  
• 3.5" LCD touch screen
  
• Light source: D65
  
• Wave length: 400-700nm
  
• Includes ISO calibration certificate.

The PiCUS TreeQinetic Trunk Risk Tester is used to perform load tests (or pull tests) on trees for an advanced method of tree risk assessment. The TreeQinetic load test also measures both the flexural strength of the trunk and the anchorage strength of the root system.

The tree pull test method was developed by Günther Sinn and Lothar Wessolly in the early 1990s.

The PiCUS TMS 3 tree motion sensor performs a measurement of the tree's wind response to check the depth of the tree to get information about the stability of the tree and is determined by its root anchoring force in the ground.

UCI Hardness Tester PCE-5000 is a hardness tester that uses the ultrasonic contact impedance (UCI) method of ASTM A1038 to measure the hardness of metals and alloys with a minimum thickness of 2 mm / .08 in, in Non-destructive testing produces micro indentations.

• Measured according to the method of ultrasonic contact impedance (UCI) of ASTM A1038
  
• Measurement units: Rockwell A (HRA), Rockwell B (HRB), Rockwell C (HRC), Brinell (HB), Vickers (HV) and MPa (N/mm²) SI units
  
• Measuring range: 61-85.6 HRA, 41-100 HRB, 20.3-68 HRC, 85-650 HB, 50-999 HV, 255-2180 MPa (N/mm²)
  
• Accuracy: ±1.5 HR, ±3% HB, ±3% HV,
  
• Repeatability: ± 0.3%
  
• Memory size: 1,000 groups for measurement data and 20 groups for calibration data
  
• Different types of probes (automatic motorized transducers) are available.

UCI hardness tester PCE-3500 - Ultrasonic contact strength tester is designed for non-destructive hardness measurement of metal components. A 136° Vickers diamond at the probe is excited with its self-resonance to allow the user to very precisely measure the hardness of small objects, thin-walled objects (>1 mm) and hard layers surface.

• Probes with 50 Newtons / 11.2 lbf force, 10 and 98 N optional
  
• Test HRC, HRB, HV, HB, MPa
  
• Memory function via SD card and PC software included
  
• Large color LCD display with backlight.