Products

Food ATP Test Meter PCE-ATP 1 - An ATP tester or an ATP meter, the photometer is used for surface testing. This food inspection meter enables quick and easy first-generation adenosine triphosphate (ATP) testing and monitoring to ensure proper cleaning, disinfection and sanitation. The PCE-ATP 1 is an ATP tester that can be used for cleanliness control and documentation use in a wide variety of applications.

• Measuring range: 0 ... 999,999 relative light units (RLUs)
  
• Store up to 10,000 date and timed data records in internal memory
  
• Allows rapid detection of bacterial residues.

The PCE-BTM 2000 belt force gauge is an optical measuring instrument for the determination of belt tension. This force gauge consists of a display unit and sensor on a gooseneck cable. Dynamometer measures belt tension in stationary state.

• Measure frequency of belt oscillation
  
• Measuring range: 10 ... 900 Hz
  
• Accuracy: ± (1% of rdg. + 4 digits)
• Resolution:
  • <100 Hz: 0.1 Hz
  •  >100 Hz: 1 Hz
• Memory: 750 measured values
  
• Optical sensor on gooseneck.

PCE-DFG N 500 Force Gauge or Digital Force Gauge for pulling force and pressure gauge up to 500 N. PCE-DFG N 500 is the PCE-DFG N 500 digital force gauge for measuring force accurate with 0.1 N . resolution.

• Measuring range: 0 ... 500 N
  
• Accuracy: ±0.1%
  
• Memory for up to 100 measurements
  
• Measure traction and pressure
• Sampling rate 1600 Hz
  
• Interface: USB
  
• 6 different measuring tips
  
• Includes ISO Calibration Certificate.

PCE-DFG N 5K-ICA force gauge - Digital force gauge measuring both tensile and compressive forces with very high accuracy and resolution. This tensile and compressive force measuring device is commonly determined in a laboratory, e.g. to determine yield, breakaway force and force required to push a button or switch.

• Measuring range: 0 ... 5,000 N / 0 ... 1,124 lbs
  
• Resolution: 1 N / 0.22 lbs
  
• Accuracy: ±0.1%
  
• Memory stores 100 measurements
  
• USB interface
  
• Graphic display
  
• Includes ISO Calibration Certificate.

PCE-DFG NF 50K Force Gauge - Compressor with external load cell attachment designed to measure compressive forces at hard-to-reach measuring points. The probes have several threaded holes at the bottom allowing for a secure installation during measurement.

• Measuring range: 0 ... 50 kN / 50,000 N / 5,000 kg / 11,240 lbs
  
• Resolution: 0.5 N / 0.1 lbs
  
• Accuracy: ±0.5%
  
• Memory up to 100 measurements
  
• USB interface
  
• Graphic display
  
• Includes ISO Calibration Certificate.

Formaldehyde Meter - HAL Technology's HCHO toxic gas detector HFX205 is designed to detect formaldehyde in the air. The Formaldehyde Meter HFX205 indicates in situ formaldehyde concentrations thereby avoiding costly and time consuming analysis in laboratories. The Formaldehyde Meter HFX205 works with an electromechanical sensor and is designed to determine the allowable current limit. A measurement can be taken in less than 30 seconds.

• Formaldehyde range: 0…10 ppm
  
• Short reaction time
  
• Real-time display
  
• Manual and automatic data storage
  
• Hi-Speed USB
  
• Software for online data transmission.