Oxygen and Toxic gas detector TXgard Plus
Price: Liên hệ
| Model | TXgard Plus |
| Manufacturer | Crowcon |
| Power supply | |
| Weight | |
| Size | |
| Condition | Còn hàng |
| Warranty | 12 tháng |
I. Specification TXgard Plus oxygen gas detector
Non-intrusive calibration:
- The TXgard Plus Crowcon Oxygen and Toxic Gas Detector can be performed on site without a hot work permit - minimizing downtime.
- Local display and buttons allow calibration without opening the junction box.
Flexible output options:
- 4-20mA current source or source - works with a wide selection of control boards.
- 3-wire format
- Optional relay for alarms and faults - can be used for local alarm switching.
Sure and reliable:
- The TXgard Plus Oxygen and Toxic Gas Detector is built in marine aluminum with a stainless steel sensor housing - a proven track record to operate in the harshest environments.
- Ingress protection according to IP65.
Low cost:
- Intrusive calibration - easy to operate and maintain
- Long-life sensor - keep on-site operation to a minimum
- Simple spare parts replacement.
A wide range of sensors:
- Carbon Monoxide, Hydrogen Sulphide and Oxygen of available electrochemical sensors.
II. Specifications of Oxygen and Toxic gas detector TXgard Plus
| Size | 200 x 115 x 115mm (7.9 x 6.1 x 6.1ins) |
| Weight | 2.2kg (4.9lbs) |
| Ingress protection | IP65 |
| Enclosure material | Junction box: Marine grade alloy |
| Sensor housing: 316 stainless steel | |
| Power | 10-30Vdc, 210mA max (relay version) |
| 160mA max (non relay) | |
| Cable entries | 2 x M20 or 1/2” NPT |
| Operating temperature | -10°C to +55°C (-14°F to 131°F) * |
| Humidity | 15 to 90% RH non-condensing |
| Relays (optional) | SPNO or SPNC contacts rated |
| 30Vdc 1A (non-inductive load) for Alarm 1, Alarm 2, Fault | |
| Display | 3-digit LCD back-lit display, LED status indicator |
| Calibration method | Via magnetically operated buttons |
| Electrical output | 3 wire 4-20mA, sink or source |
| Terminals | Suitable for up to 1.5mm2 cable |
| Sensor type | Electrochemical |
| Repeatability | +/- 2% FSD typically |
| Zero drift | +/- 2% FSD, 6 months typically |
| Response time | Contact Crowcon for a full list of sensor response times |
| Performance | Tested in accordance with EN60079-29-1 |
| Hazardous area zones | Zone 1 or 2 |
| Approvals | Ex II 2 G |
| Ex db IIC T6 Tamb -20°C to +55°C | |
| EMC compliance | EN 50270, FCC: CFR 47 Part 15, ICES-003 |
| * Figures shown exclude the sensors – Please contact Crowcon for a full list of sensor operating temperatures | |
| Gas | Range Available |
| Carbon monoxide (CO) | 100, 250, 500, 1000ppm |
| Hydrogen sulphide (H2S) | 25, 50, 100, 200ppm |
| Oxygen (O2) | 25% vol. |
No comments yet
SIGN UP FOR A CONSULTATION
Please fill in the form below and send your comments and questions to GMGA, we will respond to your email as soon as possible.
COMMIT
100% new product
COMMIT
100% refund if the product is of bad quality and not as promised
DELIVERY
Nationwide
OTHER SAME PRODUCTS
Formaldehyde gas meter HFX205-100
Model: HFX205-100
Four-gas personal explosive gas meter Tetra 3
Model: Tetra 3
Fixed multifunction gas detector Xgard
Model: Xgard
Infrared 5 gas multiflow detector Gas-Pro IR
Model: Gas-Pro IR
Xgard Bright fixed toxic gas sensor
Model: Xgrad Bright
VOC gas detector Gas-Pro PID
Model: Gas-Pro PID
Crowcon infrared gas detector IRmax
Model: IRmax
Formaldehyde meter HFX205
Model: HFX205
Multi-parameter gas meter Gas-Pro
Model: Gas-Pro
Portable combustible gas detector Gas-Pro TK
Model: Gas-Pro TK
Mobile multi-gas monitoring station Detective+
Model: Detective +
Advanced gas meter Triple Plus+
Model: Triple Plus +
Flammable gas detector Flamgard Plus
Model: Flamgard Plus
Portable gas analyzer T4
Model: T4
TXgard-IS+ toxic gas detector
Model: TXgard-IS+
Infrared gas detector camera SafEye Quasar 900
Model: Quasar 900
Fixed point gas detector smart XgardIQ
Model: XgardIQ
Wireless gas monitoring station Detective Net 433
Model: Detective Net 433
Review Oxygen and Toxic gas detector TXgard Plus
There are no reviews yet.